Toll free: 877.868.1369

Shopping Cart - View Price

You must add this item to your cart to see the sale price. Sometimes, manufacturers require that products be advertised at their suggested price. When we sell these items for less we display the sale price only in the cart.
Fiat Wall Mount Tub Utility Sink - 4 Inch faucet Drillings
Fiat Wall Mount Tub Utility Sink - 4 Inch faucet Drillings
Item #:
Originally $137.00, You Save 38%
Free Shipping Eligible!   See Details
Leaves within 2 business days. Allow time for delivery.
Finish: White

Product Overview

  • Faucet shown is not included
  • Includes molded strainer and plug.
  • Fiat Products uses a specialized SMC process. See below for additional information.
  • The side fillers and bottom tub support, which are assembled in field to the mounting brackets, are made of white molded plastic polymer.
  • Utility Sinks with wall mounting capability are provided with a heavy gauge galvanized - steel bracket capable of withstanding 600 pounds
  • Certifications: CSA Approved
  • Free Shipping on orders over $50 within the 48 contiguous United States. Free Shipping on orders over $50 to most major Canadian cities. Exclusions apply.
  • Warranty Details


  • Overall Dimensions: 23" x 21-1/2" x 13"
  • Bowl Dimensions: 20-1/4" x 17-1/4" x 13"
  • Faucet Drillings: 4" Centers
  • Note: Faucet holes are not pre-drilled. When you receive this item you will need to knock out the already marked holes in order to mount the faucet.
  • Drain Hole: 2"
  • Water Capacity: 17 gallons
  • Important: Item must be inspected within 48 hours of receipt
  • Specification Sheet
  • Sheet Molding Compound (SMC)

    Consists of four dry ingredients - filler, fire retardant, thickener, and internal old release - which are mixed together. The dry items are then mixed with liquid resin and a catalyst, which form a thick paste. The paste is then spread evenly over a sheet of polyethylene and sprinkled evenly with one-inch chopped glass fibers, which in turn is covered by another sheet of polyethylene. The sheet is then kneaded with heavy steel rollers until all fiberglass is covered with paste. The kneaded sheets are then layered and left to mature in bins for three days. The polyethylene sheets are then removed and the SMC is no longer a paste but something comparable to 1/4" wet leather. It is at this point that the sheet goes into a mold under extreme heat and pressure and a desired mold is achieved.

    Product Reviews